Flipper zero holder for Panasonic Toughbook CF-19 MK4

Flipper zero holder for Panasonic Toughbook CF-19 MK4 Laptop
This holder is meant to be mounted in the left corner of the laptop using the rubber stop screw there.
remove the screw and the rubber stopper and but a bit of double sided tape on the holder and add the screw in the hole in the back of the holder.
"Mine is just fitted with double sided tape as my screw on the lid is stuck right now."

The flipper zero fits TIGHTLY in the holder with the silicone on the flipper zero.
There is a hole in the holder for the USB-C cable and a hole if you still have the lanyard attached.

I printed it using supports with the model standing up on the print bed.
printed in PLA and normal 0.2mm layers