INDX Rear Filament Sensors Holder

Checkout V2 of the holder


My take on a rear filament sensor holder. You can mount it in the place of the original left PTFE holder or mirror it if you want it on the right side.

You will need 2 square M3 nuts and 2x M3x10 screws to mount the PTFE holder to the filament sensor holder, 4x M3x6 screws to secure the top cap, and one additional M3x5 screw to mount the holder to the side of the printer. You should reuse the remaining screws from the original parts


Print with the orientation already placed and use supports on the filament sensor holder and the PTFE tube holder.

Checkout my modified filament sensors