Tentacle Sync Track E Charge and Sync Dock

3D printable dock system for Tentacle Sync Track E, can fit up to 16 Tenacles. As seen in 

Required to assemble:

• CA/Super glue

• 16x m3x12 screws,

• 16x right angle USB CC cables

  • we used https://www.infinitecables.com/products/usb-3-1-type-c-right-left-angle-male-cable-to-a-straight-male-black?_pos=1&_sid=713d93ad6&_ss=r

Assembly :

• Place cable into the holder and a drop of ca glue (let dry)

• Screw Holder to the base

Print Setting:

• Model Orientation:

  • Base: Flat with countersinks facing down

  • Holder A/B: Dock Side up with Supports enabled

• Use what works for your printer