Gyro Zeppeli - Dual Color Panel

This is a 2d panel of Gyro Zeppeli from JoJo's Bizarre Adventure from part 7, it is made to be printed in a 0,08 layer line, but you can also try to make it with a 0.16 layer line if you want, the result is really good as long as you have a decent profile for printing. Recommend using black and white for simple effects.

Instructions:
Start with a 0.16mm base layer height and then go for a 0.08 layer height
100% infill
Start with Black filament and change to white at 0.88
Recommended size is 200x200mm but can be scaled down or up for whatever final purposes

Disclaimer: This is a non-official, fan-made 3D model. This project is a work of Fan Art and is not affiliated with, endorsed by, or sponsored by Hirohiko Araki, Lucky Land Communications, Shueisha, David Production, or any of the official "JoJo's Bizarre Adventure" copyright holders.