Water Bottle Organizer Tray (Fits in Milk Crate)

This tray holds 19 bottles of water, and can fit in a standard milk crate, allowing two-tiered storage of 38 bottles in one milk crate (with upper bottles sticking up). I recommend using Rev.3, which uses the least material and has drain holes in the bottom. Rev.- is very thick, so could be good if you plan to print it in PETG and keep it in your car, to resist warping. If you use Rev. -, 1, or 2, there are no drain holes, so you can print the Drain Hole Drill Jig and use a 1/4" drill bit to drill a drain hole nicely centered in each water bottle pocket.

Category: Organization