July 20, 2026
Description
You need to print 1 stud (parametric_snap_base_Base.stl) along with the whale stl (whaleCharm.stl). The stud crown snaps into the socket on the back of the charm, and then the whole thing can be inserted into your clog hole.
To print in two colors, pause the print before layer 19 (assuming 0.2 mm layer height) and change to your contrasting color.
Would you prefer to sew whales to your shoes? Then good news, this whale is also available as a sew-on button:
License:
Creative Commons — Attribution — Share Alike
cristoper
