Jeep YJ/TJ Engine Bay Mounting Bracket

This bracket clamps onto the 3/8" rods that support the front grill on the Jeep Wrangler YJ and TJ. I used it with this MICTUNING Wireless Switch Panel, but you can adapt the bracket for whatever you need. 

Recommended Print Settings:

• Heat-resistant filament like ASA, PC, PET-G, or better. I used CF-ASA. DO NOT USE PLA as it will melt in this environment!

• Supports are only needed in the overhang of the bracket. Do not put them in the square nut holes.

Parts Required:

• 1x Electrical Panel Jeep Bracket

• 2x Bracket Clamp

• 2x M3x20 flat head screws

• 2x M3 square nuts (taken from the Prusa Spare Parts bag)