Wham Bam Universal X Carriage Belt Adapter

Updated Feb 10th 2023: Improved dimensions and updated the part to use threaded inserts. Uses three M3 4.6mm outer diameter by 3mm or 4mm length.

When using Wham Bam's Universal linear rail X carriage on a printer where the linear rail is front mounted for the X axis and the belt is on the bottom, the belt mount points are not long enough to keep the belt centered. This adapter extends the belt mount points to keep the belt in its proper position. You must use an M3 flat head screw (15mm to 20mm length) and nut to secure this adapter to the universal X carriage as the screw must be flush with the front face of the X carriage. Two additional M3 10mm hex or button head screws and nuts can be used to secure it further on each belt wing.