Thrust Bearing

All my designs & progress available @ Marginally Clever.

Bearings reduce friction between moving parts. This bearing takes greater axial load than a standard Ball Thrust Bearing. It is not recommended for applications with high radial load.

Inner diameter is 0.25"

Outer diameter is 0.63"

Height is 0.17"

Instructions

Acquire ten (10) metal 1/8" ball bearings.

Print both halves.

Place the outer ring on a flat surface

Place the ball bearings into the center.

Use a pencil to push the ball bearings into the groove on the outer ring. Some balls may be magnetized and it will take a bit of patience.

Snap the inner ring into place.

Category: Other