Shelves are made with grooves, avec drawers have a tongue, that let you to print a drawer of any height and place it anywhere into the shelf,
Shelves are stackable horizontally and vertically for an easy scale up, you can attach them together with M4x8mm csk screws and M4 nuts, side to side or bottom to top
Shelves are wall mountable, each one have 4 5mm holes at the back
Shelves are available from 2 to 15 drawers high
Each drawers are available from 1U to 6U
Print instructions
Rafts: No Supports: No Resolution: 0.2 / 0.3 mm Infill: 0%
MarcElbichon
