Vertical Drawer for 3 in. Desk Port

Required Materials:

• 2x 1/4-20 Socket Head Cap Screws (Length of threads is thickness of desk)

• 2x 1/4-20 Lock nuts

• 2mm Craft Magnets (If printing module with magnet slots)

Files “3 inch top DT” and “3 inch bottom DT” should be printed with the outer flange on supports to keep good surface quality between the hardware. “Dovetail for wire” should be printed likewise but only for the surfaces to match.

No other files need support.

Ideally, any of the modules need to be printed with the dovetail slot perpendicular to the base. However, the drive storage should have the drive slots touching the base to ensure dimensions are correct. I did not need bed adhesion printing vertically with PLA.

2mm Magnets can be glued into "MOD_MAGNETS_2MM"

"MOD_DRIVE_STORAGE_3.375" holds an assortment of short drives

"MOD_USB_QTY1" and "MOD_USB_QTY2" hold a longer USB drive vertically

2 blank module step files are included, more modules to come!

EDITS 7/22/26: 

• Increased height for Micro SD slots on "MOD_DRIVE_STORAGE_3.375".

• Added "MOD_M6_NOZZLES". This module holds 3d printer nozzles with an M6 thread pitch.