South America 3D Topographic Continent Coin 85 mm – Relief Collector Token 3D Printer File Image 1

South America 3D Topographic Continent Coin 85 mm – Relief Collector Token 3D Printer File Image 2

South America 3D Topographic Continent Coin 85 mm – Relief Collector Token 3D Printer File Image 3

South America 3D Topographic Continent Coin 85 mm – Relief Collector Token 3D Printer File Image 4

South America 3D Topographic Continent Coin 85 mm – Relief Collector Token 3D Printer File Image 5

South America 3D Topographic Continent Coin 85 mm – Relief Collector Token 3D Printer File Image 6

South America 3D Topographic Continent Coin 85 mm – Relief Collector Token 3D Printer File Thumbnail 1

South America 3D Topographic Continent Coin 85 mm – Relief Collector Token 3D Printer File Thumbnail 2

South America 3D Topographic Continent Coin 85 mm – Relief Collector Token 3D Printer File Thumbnail 3

South America 3D Topographic Continent Coin 85 mm – Relief Collector Token 3D Printer File Thumbnail 4

South America 3D Topographic Continent Coin 85 mm – Relief Collector Token

aibenk

July 23, 2026

Description Comments Tags

Description

🌍 TopoTokens – SOUTH AMERICA

An 85 mm collector coin showing the real 3D topography of South America, raised from the surface. The name is embossed on the curved rim: SOUTH AMERICA on top, SUEDAMERIKA (the German name) below. A finely milled ribbed edge frames it like a real coin. Elevation is strongly exaggerated so the terrain reads clearly at coin size (highest point: Aconcagua, 6,961 m).

▶ 8 colour versions included (one download):

• all gold / all silver

• gold rim + silver centre / silver rim + gold centre (bimetal “real coin” look)

• the same four, but with the map coloured by elevation (green / sand / white)

Plus a Collector STL and a Magnet STL (two pockets for 6×2 mm magnets).

▶ Specs: diameter 85 mm, height ~7.7 mm, watertight, no supports – print flat, back down, 0.4 mm nozzle. The bimetal / coloured versions need an AMS/MMU; all-gold and all-silver print single colour on any printer.

— — —

🌍 TopoTokens – SUEDAMERIKA

Eine 85-mm-Sammlermünze mit der echten 3D-Topografie von Südamerika. Der Name ist auf dem gebogenen Rand geprägt: oben SOUTH AMERICA, unten SUEDAMERIKA. Ein fein gefräster Riffelrand fasst alles wie eine echte Münze ein. Höhen stark überhöht, damit das Gelände in Münzgröße klar lesbar ist (höchster Punkt: der Aconcagua, 6.961 m).

▶ 8 Farbversionen enthalten (ein Download): komplett Gold / komplett Silber, Goldrand+Silbermitte / Silberrand+Goldmitte, sowie dieselben vier mit höhenfarbiger Karte (grün/sand/weiß). Dazu Collector-STL und Magnet-STL.

▶ Daten: Ø 85 mm, Höhe ~7,7 mm, wasserdicht, keine Stützen – flach drucken. Bimetall/farbige Versionen brauchen AMS/MMU; Gold/Silber einfarbig auf jedem Drucker.

License:

Creative Commons — Attribution