Cotton Swab Dispenser — Lidl Pegboard Remix

A remix of R3D's excellent Cotton Swab Dispenser with Lid, with integrated hooks so it mounts directly onto the "Lidl pegboard" (the Parkside/Lidl workshop pegboard) — no extra hardware needed.

Everything that makes the original great is kept intact: the clean enclosed body, the lift-off lid, and the internal geometry that feeds swabs down into the bottom tray. The only change is on the back of the body, where I added hooks that clip straight onto the pegboard so the dispenser hangs on the wall instead of taking up bench space.

What's in this remix

• Only the dispenser body is remixed — the hooks are printed as part of it.

• The lid is unchanged from R3D's original, so just print the lid from the original model.

• Hooks are sized for the Lidl pegboard hole pattern.

Printing

• PLA, 0.2 mm layer height, ~15% infill, 3 perimeters (same as the original).

• I recommend printing the body with supports. The added hooks create overhangs on the back, so supports give a cleaner result there. (The original body prints support-free; this is the one departure from R3D's recommendation.)

• The lid still prints without supports.

Credit
Full credit for the original design goes to R3D — please check out and like the original model. This remix only adds the pegboard mounting.