April 27, 2022
Description
For my Sculpfun S9 I designed an air assist nozzle which can hold an E3D nozzle. I tried an 1.0mm nozzle but positioning is rather hard so I drilled it to 1.5mm
Tube for air assist is on the side (left or right is on you). I used a copper tube to connect the hose.
The design is made so that the nozzle floats 1mm above the item to be engraved or cut. So the end of the nozzle is 19mm below the metal housing of the laser.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
wfvn
