Lens cap Panasonic Lumix FZ82

This is a replacement for the flimsy lens cap that came with the camera and that keeps falling off.

This lens cap clamps onto the outer rim of the lens. It has room for the lens to extend if you accidentally switch on the camera with the cap on.

Print Settings

Printer:

FLSUN QQS

Rafts:

Supports:

No

Resolution:

Infill:

15%

Filament:

123-3d jupiter series PLA

Black Post-Printing =============

After printing use some electrical tape on the inside of the lens cap to prevent scratching the camera. The cap was designed to be used with tape applied.

Category: Camera