April 28, 2022
Description
Latest version of my paramotor throttle. The handle is 20mm OD carbon fibre tube. Included 3 different levers, a long, short and a custom one I designed for my wife as she has small hands.
Print:
1 off Left
1 off Right
1 off Control
1 off Button spacer
2 off Strap clip
1 off Lever of your choice.
2 off 7mm OD 4mm ID bearings for the lever https://www.amazon.co.uk/sourcing-map-MR74-2RS-Groove-Bearings/dp/B082PS4RVW/ref=sr_1_2?keywords=7mm+od+4mm+id+bearing&qid=1581350946&s=diy&sr=1-2
1 off 12mm SPST button for engine kill switch https://www.amazon.co.uk/sourcingmap-Black-Momentary-Button-Switch/dp/B07FRYDCZ5/ref=sr_1_21?crid=OM750YN1ROZW&keywords=12mm+SPST+button&qid=1647092357&sprefix=12mm+spst+button%2Caps%2C70&sr=8-21
Screws / washers etc. If you fly paramotors you will figure it out.
Use your existing cables or buy new.
If you do not have a 3d printer can i suggest you contact Kyle Davies at the links below. He can print the parts for you with a percentage of the cost going to UK Alzheimers charity.
Website
Para-Normalppg.com
Facebook https://www.facebook.com/ParaNormalPPG
Ebay https://ebay.co.uk/usr/para-normalppg
Printer Brand:
TEVO
Printer:
Tornado
Rafts:
No
Supports:
Yes
Infill:
25%
Filament:
3D-Printz PETGBlack
Notes:
You will need to supply carbon fibre tube for the handle, the cable and kill button, fixings etc.
License:
Creative Commons — Attribution — Noncommercial
11
TwistedRisers
