P1 box - (psvanstrom/esphome-p1reader)

This is just a small simple box to contain the PCB and a Wemos D1 mini from the P1 reader project over at github. https://github.com/psvanstrom/esphome-p1reader

The fit is pretty tight and when inserting the PCB you ned to push the back part down and at the same time lift the 6p6c into place in the front.

There are 3 versions.

The one named USBHOLE have a hole for the usb (duh) if you need to reflash it etc. I havn't tested that version yet tough so print at you own risk.

The one with "longer_56mm" in the name is made to fit the new PCB. You should see the size of the pcb when you order it so choose accordingly

Print Settings

Printer Brand:

Creality

Printer:

Resolution:

200

Infill:

Filament: ClasOhlson PETG White

Category: DIY