Malt Mill mount and box

Mount for a windshield wiper motor and box for electronics.

Distance from bottom to center of motor pin is 68mm so you might need to adjust it to your grain mill.

c/c on the holes of the motor is 40mm

Here are links for the parts

• Motor: https://www.skruvat.se/show.aspx?k=17363
• Coupler:https://banggood.app.link/fuxLbYwZAeb (10mmx12mm)

Then you can source the following wherever:

• m6 extension nut (m6x30) where you file half of it round to fit in the coupler
• XT60 connector between box and motor
• Circular power switch 20mm diameter(or larger if you want to drill)
• dc powerjack (https://banggood.app.link/gM6wD2KAEeb)
• 3x m6x30(fasten motor to mount)
• 2x zipties(fasten box to motor)
• 5x woodscrews(fasten mount to millplate)

Print Settings

Rafts:

No

Supports:

Resolution:

200

Infill:

Filament: PolyMaker PLA or PETG

Category: Household Supplies