April 29, 2022
Description
New version of my Audio Strap for Pimax HMD's.
I used a cheap (about 10€) gaming headphone from AliExpress that has microphone dead for the speakers and foam. Could have been smaller but it actually fit with the rigid part of the strap.
The inner size for speakers is 40mm which seems to be standard, if too loose they might need some glue to stay in place.
Assembling the headphones by snapping the 2 round pieces together after the one with grill got inserted in foam.
For the snapping parts I printed them in PLA because I find ABS too brittle and crack easily.
If you dont want to use Headphones just print only the HeadStrap Hardener.
Updated missing parts, Hinges. Sorry about that.
Updated with 60mm headphones.Recommended.
Updated with 45/50mm headphones and TILDED ones that fit the best to me so far.
Used with those, https://fr.aliexpress.com/item/32969877364.html?spm=a2g0s.9042311.0.0.27426c37HtBbrd very comfortables, fit very well so it gives good sounds, bass ones specially.
Updated Headstrap Hardener, V2, for flatter heads.
You can donate/support here :
https://www.paypal.me/ludiks https://www.patreon.com/Ludiks https://fr.tipeee.com/ludiks-vr
Category: DIYLicense:
Creative Commons — Attribution
9
Ludiks
