Osmo Pocket TriPod Mount v2 - With Charge Port

This is a TriPod mount I designed for the Osmo Pocket.

It uses a 1/4"-20 "knurled insert" threaded brass insert so you can mount it to a tripod. https://www.amazon.com/uxcell-Inch-20x8mmx9mm-Metric-Threaded-Insert/dp/B018503MX8/ref=sr_1_2?ie=UTF8&qid=1544987284&sr=8-2&keywords=1%2F4%22-20+knurl+insert

Which is glued in place with 5 minute epoxy after printing.

The design is offset, do that you can still have the USB cable plugged in while it is mounted.

I use it with a power bank that has a tripod thread at the top.

Be aware, that all printers are different, you may need to scale the design up or down 0.5% or so to get a nice snug fit.

No Support Needed. I did mine at 40% fill but that was probably over kill.

I have also included the Fusion 360 file if you would like to edit the design.

Please link and share your versions here.

Category: Camera