Printed part edge cleaner / cutter

An attachment for a cutter to clean the edges of printed parts.

The part helps to remove remains of brim for example quite clean and straight, which can rarely succeed so well with the hand without guidance.

The blades for which it is made have a width of 9.1mm and a thickness of 0.4mm (should be widely standard I think).

Pleasetake care when inserting the blade into this part! It fits very tightly and there is a risk to hurt you if the blade brakes!

UPDATE:

Added a cleaner, remake version of the FreeCAD 0.18 file, witch cuts also +0.15mm more from printed part. STL file for this also uploaded.

This version cuts a very small chamfer on edge of the part.

Print Settings

Printer:

Anet A8

Rafts:

Supports:

No

Resolution:

Infill:

none, use only 7 perimeters (for 0.4 nozzle)

How I Designed This

This is my first and smallest design, that took me so much iterations (more than 6) to make it work and effective. But in the end, the result made me happy; hope you too! :-)

Made with FreeCad 0.18, file attached.

Category: 3D Printer Accessories