April 29, 2022
Description
A heatbed cable support for the Anycubic Ultrabase heatbed in combination (out of the box) with the Bohrers heatbed holder ( https://shop.bohrers.de/heat-bed-holder-anet-a8-und-a6-kommt-in-kuerze.html?language=de ) for the Anet A8 & A6.
Possible, that it also fits in other heatbed holders on other printers.
In the design out of the box, the heatbed holder has a thickness of 3mm and the fixing hole is 6mm from the outside and 3mm from the inner side away.
The hole is 3mm.
The cable is fixed about 12mm above the heatbed then.
You could change the dimensions with the also attached FreeCAD 0.18 file.
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.2mm (and variable (0.8-0.16 mm) in the bottom and top 2mm)
Infill:
not really needed if printed with 3 or 4 perimeters
Notes:
Rotate the thing 90° to print it flat (should be 90° in the Y axis). No supports needed (maybe only for the two holes).
License:
Creative Commons — Attribution — Share Alike
7
TheGooNie
