Raspberry PI camera v2.1 case

This newly designed camera case for the Raspberry Pi Camera Module v2.1 features a precise press-fit design. The 3D-printed components snap together cleanly, eliminating the need for glue or screws.

Inspired by the Adjustable/Rotating Mount for Raspberry Pi Camera V2

Print instructions

• 0.15 layer height

• 20% infill

• Use supports for camera back and camera angle files

• PLA Recommended, other materials should also work

General Notes

You need to add supports for plate only to print camera-back.stl and camera-angle.stl for the smaller parts a brim of at least 4mm is recommended.

Assembly Instructions

To screw the optional arm parts together you will need:

• 3 M3 x 10 Hex Socket Screws

• 2 M3 normal nuts

• 1 M3nS square nut
  You may also need some Super Glue in order to hold the camera front and back together if the press fit does not suffice

If you print it, feel free to post a make — I’d love to see your setup!