April 29, 2022
Description
During my experiments and test setups with an Arduino or a Raspberry, it always bothered me that the mainboards and the breadboard could slip around loosely.
The result of my considerations was this base plate where an Arduino Uno, a Raspberry Pi and a long breadboard found a fixed place.
Printer settings:
Material: PLA, ABS, PETG etc.
Resolution: 0.2mm
Wall thickness: 0.8 - 1.2mm
Top/Bottmom thickness: 0.8mm
Infill: 15-20%
Support: no
Build Plate Adhesion: Skirt
Category: ElectronicsLicense:
Creative Commons — Attribution
10
Sisul
