Coin coaster Euro 50 cent 3D Printer File Image 1

Coin coaster Euro 50 cent 3D Printer File Image 2

Coin coaster Euro 50 cent 3D Printer File Image 3

Coin coaster Euro 50 cent 3D Printer File Image 4

Coin coaster Euro 50 cent 3D Printer File Image 5

Coin coaster Euro 50 cent 3D Printer File Image 6

Coin coaster Euro 50 cent 3D Printer File Image 7

Coin coaster Euro 50 cent 3D Printer File Image 8

Coin coaster Euro 50 cent 3D Printer File Image 9

Coin coaster Euro 50 cent 3D Printer File Thumbnail 1

Coin coaster Euro 50 cent 3D Printer File Thumbnail 2

Coin coaster Euro 50 cent 3D Printer File Thumbnail 3

Coin coaster Euro 50 cent 3D Printer File Thumbnail 4

Coin coaster Euro 50 cent 3D Printer File Thumbnail 5

Coin coaster Euro 50 cent 3D Printer File Thumbnail 6

Coin coaster Euro 50 cent 3D Printer File Thumbnail 7

Coin coaster Euro 50 cent

Dreamtime24

Description Comments Tags

Description

Realistic Euro 50 cent coin as a coaster

This is a replica of an Euro 50 cent coin for use as a coaster. The diameter is 10.1 cm (3.9 inches).

You can use any filament color which you like for the Euro 50 cent coaster. The original color of the 50 cent coin is a gold color called "Nordic Gold".

Let the design to be the upper side on your printer's build plate. The flat side is at the bottom.

The Euro 50 cent coin now comes in 3 flavours.

Coin type A

Coin coaster with top design and flat bottom side with 3 holes for the rubber stoppers on the bottom side. This design is printed in one go. Of course you can use the coin as a coaster also without the rubber stoppers.

Coin type B

Coin coaster with top and bottom design. There are 3 holes for the rubber stoppers on the bottom side. The print consists of the top and bottom part separate. The parts must be glued together after the print with the flat sides facing each other. Of course you can use the coin as a coaster also without the rubber stoppers.

Coin type C

Pure coin with top and bottom design without any holes on the bottom part. The print consists of the top and bottom part separate. The parts must be glued together after the print with the flat sides facing each other.

Enjoy printing these items.

Print Settings

Printer:

FLSUN Super Racer

Rafts:

Supports:

Resolution:

0.2 mm initial layer, 0.2 mm layer height

Infill:

20 %

Filament:

MKOEM PLA

Silk Light Gold

Notes:

Nozzle not larger than 0.4 mm to print the fine details.

Post-Printing =============

Glue round rubber or foam sheets (optional)

You may want to glue 3 round 10 mm (0.4 inches) rubber or foam sheets with 2.5 mm thickness to the bottom holes of coin A and B. This will make the coaster sit on the table in a stable way.

How I Designed This ===================

Coin design

The coin was designed with Blender. I have designed the base coin first. Using a reference photo I have extruded points to match the text and ornaments on the top and bottom surface.

Coin C during the print =======================

Category: Coins & Badges

License:

Creative Commons — Attribution — Noncommercial