April 30, 2022
Description
This is a pendant showing the Australian continent - sorry without Tasmania. The size is 49 mm x 35 mm, thickness 3 mm. The pendant consists of 3 parts: a base part, a contour and an inlay. Feel free to choose any color you like. I recommend to use 3 different colors.
The pendant has a hook at the top.
Comment: The lanyard shown on one of the pirctures is not included in the print.
Printer:
FLSUN Super Racer
Rafts:
No
Supports:
No
Resolution:
0.2 mm layer height
Infill:
Solid
Filament:
Any Any filament your printer can handleAny
Notes:
Set the print speed quite low, as the item is small. I recommend not more than 30 mm/s. No supports are needed.
Glue together
When the 3 parts are printed, glue the outline to the base plate. Glue the inlay to the base plate.
Pendant "Australia"
Category: AccessoriesLicense:
Creative Commons — Attribution — Noncommercial
Dreamtime24
