April 30, 2022
Description
I wanted to make something that would resembled the "UFO Burger", but I couldn't find a sandwich press with that shape or sandwich depth.
I did find many references to the "Uncrustables™" by Smucker's® ... and the DIY versions for making them yourself.
There was one older entry here on Thingiverse that looked pretty good, but needed some updating, as the sides aren't very smooth (round?).
Enter my version. I smoothed the sides, tweaked the width, and reset the height so the crimper can reach the bottom when inserted from either side (on the cutter).
Printer Brand:
TEVO
Printer:
Tornado
Rafts:
No
Supports:
No
Resolution:
25mm
Infill:
50%
Filament: Inland PETG Natural
Notes:
You can change the infill if you wish. I print this with side walls set at 1.6mm so the cutter has minimum infill in the cutting walls.
License:
Creative Commons — Attribution
10
TeamOliva
