Among Us Sus Cookie Cutter Set

Much to my surprise someone in Bolivia made a claim (with Thingiverse) that I had "plagiarized" their 3d design for my Among Us Cookie Cutters. I made my case with Thingiverse, and awaited their decision.

Thingiverse decided in my favor so my original posting is now available for viewing and download.

I add the original cookie cutters to this posting while my original posting was blocked, so I guess I'll just leave them available here as well.

---

I contacted InnerSloth (the company that made Among Us) and made them aware of my situation.

This is the email I received from InnerSloth on 11/26/20

Innersloth Licensing [email protected]

Thu, Nov 26 at 5:11 PM

Hey,

If you are not selling anything, we have not issued you a takedown! We're sorry this has happened; if you want to get it reinstated with the Thingiverse folks (again as long as it's not being sold) feel free to link them to our fanart/creation policy which explicitly allows this!

Best,

---

Ok, so "Among Us" isn't exactly a Halloween icon, but I needed a cookie cutter for a baking class I am taking and I happen to like "Among Us" quite a bit.

You may want to print this cutter out twice, once regular and once mirrored, so you have crewmen looking both directions.

I was asked if I could include a cookie cutter for a "Dead" crewman, and so I have added one and made this a set of cookie cutters.

I also received a request for the Dead Crewman laying on their side and the Crewman Ghost.

I am elated with the response I have received to my original Among Us Cookie Cutters. Everyone certainly seems to like them.

Like the original set, you may wish to print out two cookie cutter of each design, once normal and once mirrored.

As always I am including a copy of my basic "Sugar Cookie Dough" recipe.

---

I received a request to include a set of cookie cutters that had thick walls on the outside, all the way to the top. So I have added four (4) STLs with the designation "Thick Walls".

Print Settings

Printer Brand:

TEVO

Printer:

Rafts:

No

Supports:

Resolution:

.25mm

Infill:

Filament: Inland PETG Natural

Notes:

Category: 3D Printing