April 30, 2022
Description
I bought a Scott Spark RC 900 2020 model, with the very well known vertical rear suspension (which I love), so there is no space for a toolbox bottle cage, I did not want the saddle bag because it gets full of mud and asked myself "What if you try to design a toolbox that locks with one of the bottle cage bolts and fits perfectly with the bike?". Long story (because it took me over one month of trial and error) short, I did it and IT'S PERFECT!!
No, seriously, why hasn't SYNCROS sold one of these toolboxes? Specialised has the SWAT system, what would have cost SYNCROS to do something similar? I have been asked tones of times if I sell those, nearly every owner of a SCOTT SPARK that has seen the toolbox wants one. It takes me too much time to print them, otherwise, I would sell them.
What do I fit into the toolbox?
(and there is still some more room for maybe a key)
IMPORTANT: The version posted fits perfectly with an "SYNCROS TAILOR CAGE 1.0 RIGHT" bottle cage, the one that I have, cannot guarantee the fit with other bottle cages, but I can release a universal version if someone asks.
NOTE 1: Normally I tend to release the design in f3d, not this time, this thing has taken me so much time of design, over 15 full prints until the final design, I have even had to learn how to print with PETG and master it (because PLA is not strong enough)
NOTE 2: Is splashproof, water enters, the SWAT from Specialised is not waterproof and neither my homemade toolbox for the bike is.
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,2mm
Infill:
50%
Filament: SMARTFIL PETG Cobalt
Notes:
I have attached in the file section the Cura 4.4 profile that I used when printing it in my Creality CR-10S, which might be OK as a start point, worked for me on a fairly stock CR-10S, might not be the best profile, but it worked perfectly for me.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
11
aqf23
