January 23, 2020
Description
Inspired by the #WaveyWednesday movement on Twitter which was inspired, in part, by the wavy creations of Ferjerez, I created this "Wavy Clock". Made to take a clock movement and some clock hands, once printed, this can be hung in the home or office for a unique accent.
While not particularly difficult to print, you may find some slicers don't slice it quite right in vase mode due to the hole in the center. Slic3r PE added extra layers to the top which, in turn, will mess up the spiral. Cura does a great job. Kisslicer appears to slice correctly, however, I have not tried printing gCode generated by Kisslicer for this model.
Be sure, once you slice in vase mode, that you look at the preview mode in your slicer (that which displays the tool path) and ensure that the center hole is not covered and that the vase path looks valid.
For an extra accent, if your printer supports it, try a layer change to highlight the numbers.
If you like this model, please share it!
If you print this model, please consider posting your make!
If you LOVE this and want to support my future work, please consider a small tip - I promise I'll only use it for printing supplies!
If you want to support me and get GREAT filament at the same time, please visit Proto-Pasta using my affiliate link and get yourself some excellent HTPLA!
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 0% (Vase mode)
License:
Creative Commons — Attribution — Noncommercial
Dan the 3D Printing Dad
