22 and 15mm sensor pipe clips

Clips for holding 1-wire sensors to 15 and 22mm pipes.

I wanted to attach some 6mm O/D 1-wire temperature sensors (http://www.sheepwalkelectronics.co.uk/product_info.php?cPath=23&products_id=63) to my heating pipes.

Yes you could just use a cable tie but a 'proper' clip looks much better :-)

Print Settings

Printer Brand:

LulzBot

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2

Infill:

Notes:

Obviously you need to use a heat resistant material (although heating pipes won't get much over 70C) and a it'll need to be non-brittle as the clip needs to flex a bit to fit onto the pipe.rnrnFWIW, I used Nylon.

Category: DIY