April 30, 2022
Description
This is a spacer for a 2-Gang Patress box. There's a 1-Gang version lurking here: https://www.thingiverse.com/thing:4018006
I was fitting some controlled sockets and a couple of my patress boxes were too shallow; hence the need for a spacer (easier than chopping out the brick for a deeper patress box).
Yes, I know you can buy these for not-a-lot from a DIY store but I wanted black and they're not so freely available.
The outer dimensions (149 x 89mm) are for an Energenie/MIHome 2-Gang Nickel 13A socket (https://energenie4u.co.uk/catalogue/product/MIHO021) but I've included the Fusion 360 design so you can tweak it to suit.
I've uploaded 8, 10 and 12mm versions as stl files.
Printer Brand:
LulzBot
Printer:
TAZ 6
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
20%
License:
Creative Commons — Attribution
8
Ruffle
