April 30, 2022
Description
After using the Spring based anti-vibartion feet for a while I wasn't too pleased with the result. To my opinion using the springs the machine is rather instable and shakes all the time especially when the head makes short movements. I think that because of the springs this "shaking energy" stays in the machine rather than being transferred away from the machine.
For this reason I created my own feet that raises the machine 30 mm and has a larger support area for the machine. I've been using them for a short while and I think the machine is much more stable. At least, it doesn't dance around anymore like with the spring-based feet. Adding some padding even makes them quiet as well.
You need the same feet for all 4 corners.
Printer:
CTC Bizer Dual
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Notes:
No need for supports. I created some solid support grid inside the feet (see print photo) so weight of machine is divided equal.
License:
Creative Commons — Attribution — Share Alike
7
Lyricon
