April 30, 2022
Description
Simple and easy print (no support) design.
Just use standards 20mm stick tape on the back, fasten the clip and twist in and out the cable.
If you are laying along some corners you might need the mirrored version in order to get the correct twist in direction.
Printer Brand:
Anet
Printer:
A8
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.25
Infill:
50%
Filament: Sunlu PLA Wood How I Designed This ===================
FreeCAD
Model included
License:
Creative Commons — Attribution
8
caesar_1111
