Rudolph the Red Nosed Reindeer Mod

thks to elnegrozumbon I was printing some Christmas decoration, when they said, the red nose is missing.

So here we go, I designed a easy to print red nose fitting the initial design of elnegrozumbon.

The FreeCAD and step models are included if you want to change anything on your own.

Please also like the initial sculpture: https://www.thingiverse.com/thing:4676393 !!!!!

Some tips for printing the reindeer:

If you do not want to go for the support on the backside and can live with a flat back, just lower the model by -7mm. This will allow you to print without support.

It also looks not to bad, if you just mirror the model so you will get a set of reindeers facing eachother....

The nose should work without support, but I printed with, since its only 3 min more and with support interface turned on, it comes of very easy.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.15

Infill:

Filament: Sunlu PLA Red How I Designed This ===================

FreeCAD

Category: Sculptures