April 30, 2022
Description
I was trying out some camera bed mounts for the Anet A8 but I always found the designs to wobbly and the vibration too high while fast printing or if a heavier camera like a GoPro were used. I also wanted an easy way to disassemble for printer maintenance.
I hope my design is now meeting the requirements.
Since I am using a Microsoft LifeCam VX-700 Webcam the bracket and beam allows for an easy clamping fit for this webcam. All other adapter just need a 3,4mm thick plate, which can be clamped into the bracket or beam tightening it with the wing screw.
The setup can be a single bracket, which will support lighter cameras or a double bracket and beam setup for heavier cameras. If you need a higher point of you, you can use the extenders with 20mm, 30mm or 40mm.
Feel free to use the freeCAD model to tune the mount to your needs.
deburring and tread-cutting
Required if you are also using the printed wings crew, might be obsolete when using a of the shelf M8 metal screw
FreeCAD
Model included
License:
Creative Commons — Attribution
7
caesar_1111
