Ray gun prop - print in parts for smaller printers

WerkRaum's model (originally based on https://www.thingiverse.com/thing:2091732) is awesome, but I wanted one I could print in different parts rather than sand-and-paint.

This version was remodelled from scratch using that design as reference, and split into parts which would fit on the MINI+.  It doesn't include the electronics and working trigger so is just a static prop.

3mf files include filament changes and supports where needed if opened in PrusaSlicer.

f3d file includes a parameter fit to adjust the gap tolerance where the pieces fit into each other.

Assembly

• primary colour
  • print the body left and right and glue together
  • print the handle and trigger and glue into place
• trim colour
  • print the sides and fin and glue into place
• filament change - both colours
  • print the antenna with trim colour and the tip in primary colour (or a bright danger colour if you prefer!)
  • print the barrel+trim starting with trim colour and alternating filament every change.
    • attach the barrel to the body and glue the rings/bauble to the other end
  • attach the antenna to the barrel
• stand colour
  • Optionally print the stand to give your model somewhere to sit until you need it.

License

As a remix closely based on but not using any actual part of another design, I've chosen to follow the CC-BY-NC-SA license chosen by that designer.