Low profile Glock rail to picatinny adapter

Glock rail to Picatinny adapter, for when you want to fit a pic rail only item or mount. Gives you 5 slots. Made it as low-profile as possible while still maintaining the correct picatinny dimensions. Fitted for Gen 4, haven't tried on other gens.

NATO Accessory Rail (STANAG 4694) used, but backwards-compatible with the STANAG 2324/MIL-STD 1913 Picatinny rail.

Print standing on front end, with a brim if having adhesion issues. Support between the rails.

Tolerances are tight, so test print using different extrusion settings to get the fit right, or sand etc until you get it snug. There is a thin wall where the screw goes through that may not print but that's normal.

Use a single M4x25 machine screw & regular nut (or lock-nut) to secure. Screw head diameter: 6.35mm. Nut: 6.8mm (flat to flat)