May 1, 2022
Description
As I had a few 8mm steel balls over from another project, I designed this 16014 ball bearing to suit the open source ciclop scanner bed. Uses 12 balls and is easy to assemble as the ball cage just clips into place. http://www.thingiverse.com/thing:740357
April 8th >> Updated The 12 ball runs fine but added an 18 ball cage if you want/need the bearing to run smoother.
here's a link to where I source the steel balls >> http://www.banggood.com/50pcs-Wheel-Bearing-Balls-from-4568910MM-p-967092.html
Printer:
Prusa Air 2
Resolution:
0.3-0.2
Infill:
min 30%
Notes:
If you print the inner and outter ring together you may need some clean up of the retract area where the printer goes from one object to the other but nothing major
License:
Creative Commons — Attribution — Noncommercial
8
Phil M
