Raspberry Pi Open Wall Mount

Simple open wall mount designed for the Raspberry Pi 3B+, Pi 4 and Pi 5. All ports and pins are accessible.

No additional hardware needed; the Pi is held in place firmly by 3 clips.  The Pi 5 version has one clip in a slightly different position, however should still be compatible with the previous models.

Important note: if using the cross shaped screw holes, check your screw head is not touching (and shorting) the back of the board. I have included an 7mm clearance version to accommodate larger screw heads.

Recommend printing everything above the 3mm base at 100% concentric infill (or increase the number of perimeters/walls) to achieve the best quality mounts and clips.

No supports needed.

4mm clearance version pictured.