May 1, 2022
Description
These two 3d printed wheel parts will mate up with a standard continues rotation servo for robot projects. 4 screws hold the hub cap to the drive wheel and the drive wheel to the servo horn. A 45 mm rubber O ring is snapped in to the slot for traction. I used the wheel for this custom 3d printed robot project that can be seen on you tube..https://www.youtube.com/watch?v=zC0FQ4O-J0c
Rafts:
No
Supports:
No
Resolution:
standar setting
Infill:
15 %
Notes:
Printed on a Flash Forge Dreamer in PLA filliment.
parts designed in Design Spark Mechanical
All of the parts you see in the video for the 3d printed robot were made in Design Spark Mechanical. The robot is under control of a POLOLU 6 mini. Powered by 4 AA batterys.
License:
Creative Commons — Attribution
9
robothut
