Nerf RK Flashlight Side Mount for MKII

Our local hardware store, Rural King, has these flashlights for a couple dollars and we always have a bunch of them laying around the house. The kids frequently tape them to their Nerf guns. Since the Recon MKII has a rail on the side of the gun, that never gets used, I thought that would be a great place for a flashlight.

This mount has a "C" clamp for mounting flashlights that measure about 25-30mm diameter.

This flashlight mount will work on any rail including my Retaliator.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

.2mm

Infill:

Filament: Any PLA PETG Any Post-Printing =============

You will need four M4x12 and a M4x16 (or five M4x16 will work too) and 5 nuts.

How I Designed This

I started off with ornotermes "Sipik SK68" because I like the adjustable rail feature. The mount did not fit, so I used Tazmainia "Bike Light" but it would not open enough for the flashlight. I split it in half and made it into a "C" clamp and then mounted it. Trying to get the size and the screw hole matched up was quite challenging.

https://www.thingiverse.com/thing:1156002 https://www.thingiverse.com/thing:821860

Category: Sport & Outdoors