January 26, 2020
Description
This is a housing for one of those cheap temp sensors you get on banggood or whatever. I can't remember the model number I used or I would put it on here.
I included a well ventilated space next to the display for a small circuitboard to be installed. I utilized a 78l05 linear regulator here to step down voltage from 12v (my lights) to 5v (sensor). This works out well because the sensor I have only draws maybe 25mA tops so there's not a heat issue at all.
pretty straight forward to print. Been a while for me so sorry I can't give more detail than that.
License:
Creative Commons — Attribution — Noncommercial
7
muckypops
