Jaguar XJS AAV Plug

This is a plug to block off the AAV inlet on the Jag V12.

I'm sure we all know how troublesome the AAV is on these cars, it's failed on every single one I've bought... so here's my solution. I don't know the long-term effects of blocking off the AAV, and for that reason I'm not going to recommend this... however if you're like me and just have a cheap parts car or don't care or something, this should work fine.

I'm including 2 designs: One is a simple cap that goes over the port, the 2nd one is a plug with barbs that goes down into the port. If you have flexible filament (TPU or similar) I recommend the 2nd design.

If you don't have TPU,use the cap-style design; I strongly recommend the flexible filament for this job, however, I understand not everyone has that on hand. You may have to play around with the scaling on the cap-style one depending upon your printer and material.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

No

Supports: 

No

Resolution:

.16

Filament:

Generic TPU recommended

Category: Automotive