"The Snail" Titan Aero Fan Duct V2.0.1

This is an update 2.x of my Titan Aero Fan duct. It should work on every printer with every Titan Aero mount where it is mounted in the same position as mine (check Fotos)

Features/Design concept:

1. It's not covering the hotend so you can see what's printing
2. Very good cooling (left and right)
3. Adjustable height (+/- 1mm)

4. It should work with any mount as it is fastend directly to the aero's heatsink
   If you like the design and use it: PLEASE, LEAVE A TIP!

   Mounting bits:
   for the fan duct : 2x M3 Washers and 2x M3x35mm or longer screws
   for the radial fan : 2x M3 Washers and Nuts and 2x M3x20 screws

Print instructions

Category: 3D Printer Parts Print Settings

Printer: Geeetech A10

Rafts: No

Supports: Yes

Resolution: 0.2

Infill: 25%

Filament: NuNus PETG
Notes:

Update 03.01.2019: V2.0.1 solves a little bug where the bridging at 17mm failed in certain scenarios.