May 2, 2022
Description
VaseMode StarLamp.
The star diameter is nearly 300 mm, so
you need a 3D printer with at at least 300 x 300 mm base.
The lamp can be placed on the ceiling or on the wall.
Use 0.1mm layer-height for 0.4 mm nozzle in vase-mode for the star-lampshade. Se the Extruder picture for ajusting the sliser for nearly 1mm wall thickness with 0.4 mm nozzle.
Use 0.2mm layer height for the Base.
Glue TopKnobOver on top of the star-shade on the outside.
Glue TopKnobUnder on top of the star-shade underneth.
After the glue is dry, drill true the top holes with 5mm drill-bit.
use 8mm wide LED strip and cut to length and slide into the 5 Base-tracks.
Use a 5 mm thread tap to bruch up the threads for ataching the lampshade in the base.
Use 30x5 mm screw with hex head for Screwhead for fasten the starshade to the base.
Filament:
Clear or White
Category: DecorLicense:
Creative Commons — Attribution
Vidar
