Sefie stick. Long. Vasemode.

Telescope Sefie stick. Nearly 1 metter long.

Important:

In Vasemode, for optimal tight fit, you need about 0.9 mm wall-thicknes.

This can be done for 0.4 mm nozzle by using Extrution Multiplyer= 1.40 and Extrution With = 0.6.

Use also 1 bottom layer and 0 top layer. Remove the bottom layer after printing.

Se picture for Siplify 3D sliser settings for this.

It is important that all RodPart elements has a tight fit.

For other parts (not vasemode), do not overextrude. (Use Extrution Multiplyer= 1.00 and Extrution With = 0.4), othervise the tread may not fit.

All my GoPro related Things:

GoPro Bike and tripod atachment with quick coupling https://www.thingiverse.com/thing:4570589

Phone stand with screw and GoPro atachment https://www.thingiverse.com/thing:4328023

Phone Atachment to Bike with spring damper https://www.thingiverse.com/thing:4458076

Heavy GoPro Base Stand https://www.thingiverse.com/thing:4693687

Light GoPro Base Stand https://www.thingiverse.com/thing:4696458

DSLR camera Stand with GoPro atatchment https://www.thingiverse.com/thing:4424068

GoPro Attachment system https://www.thingiverse.com/thing:4696725

Ring Light https://www.thingiverse.com/thing:4696747

Sefie stick. Long. Vasemode. https://www.thingiverse.com/thing:4678212

GoPro 360 coupling https://www.thingiverse.com/thing:4697342

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.2 og 0.14 for threaded parts

Infill:

Filament: Polymaker Polyflex PLA

Category: 3D Printing