X-mas tree for LED Vasemode

X-mas tree. Important. In vasemode, use0.1 mm layer height.

If you use 0.2mm layer height, the tree wil fall apart while printing.

There is also one STL file for tree in regular mode printing, but vasemode version will give a better result.

Use a 3 layer brim in vasemode. for at least 15 outlines and no top and bottom layer.

The top star isNOT vasemode. It need good support.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.10

Infill:

Filament: Polymaker Polyflex PETG or PLA clear, clear green and yellow for top star

Category: 3D Printing