May 2, 2022
Description
Fix for broken Shower Head Holder for 22mm showerRod diameter.
Use preferably PETG because it is more water resistant.
Other bits and Peaces are:
1 pc. 40 x 5 mm screw with nut.
1.pc. 35 x 5 mm screw with hex head.
1 pc 20 x 5 mm screw or 15 x 5 mm screw.
1 pc. rubber O-ring 23mm diam. (F-17)
Use a threaded to brush up the threaded holes. after printing.
The O-ring is for holding the showerhead in place and still adjust it up and down.
Se also: https://www.thingiverse.com/thing:4627174
for Shower soapdish.
Rafts:
Yes
Supports:
Yes
Resolution:
0.2mm or bether
Infill:
30-40%
Filament:
PETG
Notes:
Use brim for good attachment to the bed.
License:
Creative Commons — Attribution
Vidar
