May 2, 2022
Description
A pile of different Vases. Most of them has two versions. Vase mode and "Normal" printing mode.
It is recommend with 0.1 layer height and/or 0.8 mm nozzle for some of the vases in vasemode because they have areas that are quite low slope some places. I also used 0.06 layer height.
Simplify 3D sliser has option for split process that can be used in this problem areas. This is espesialy true for "Revolve-seks-vasemode" and for the bands around the neck because the top of the bands are nearly horizontal.
Category: 3D PrintingLicense:
Creative Commons — Attribution
9
Vidar
